If you can´t view this email properly, please click here...

Modellbahn Union Newsletter

Dear customer,

our novelties and special offer for HO:

HO gauge AC (Marklin)

Marklin-39005

Model: The locomotive has an mfx+ digital decoder and extensive sound functions. It also has controlled high-efficiency propulsion with a flywheel, mounted in the boiler. 3 axles powered. Traction tires. The locomotive and tender are constructed mostly of metal. A 7226 smoke unit can be installed in the locomotive. The triple headlights change over with the direction of travel. They and the smoke unit that can be installed will work in conventional operation and can be controlled digitally. The locomotive has firebox flickering that can also be controlled digitally. Maintenance-free warm white and red LEDs are used for the lighting. There is a permanent close coupling with a guide mechanism between the locomotive and tender that can be adjusted for track curves. The rear of the tender has a guide mechanism and a close coupler with an NEM pocket. A mechanism is built into the tender to lower the coal load in order to represent visually the consumption of coal in the tender in the World of Operation mode. For digital central controllers without mfx+ the lowering and raising of the coal load can be activated by means of special function F8. The minimum radius for operation is 360 mm / 14-3/16". Protective piston sleeves, brake hoses, and figures of a locomotive engineer and a fireman are included. Length over the buffers 27.5 cm / 10-13/16".


499,99 EUR¹
449,99 EUR*

Brawa-41649

Model:
Etched radiator guard (prototypical variant without radiator fins), free-standing handlebars and steps, clear view through the cab, lighting with maintenance-free LED, three-point support, finely detailed suspension, finest imprinting and painting, frame and wheels made of metal, construction made of plastic, coupler pocket according to NEM standard, light change, filigree, electrical coupling (exchangeable, thanks to NEM standard mounting) *, incl. Energy storage (buffers sound, engine and light), Extensive lighting functions: Rangierlicht, cab lighting, taillight individually switchable, Optimized lighting control for driving and maneuvering, flicker-free light through stabilized and buffered via a separate capacitor 5V power supply, construction-specific original sound, noise-free 16-bit sound with up to 8 independent channels, thanks to the latest sound technology and excellent sound characteristics, Optimal motor and load control for perfect running characteristics, Can be used in all common digital systems (DCC, Motorola, SX1 and SX2), cab lighting. AC version with enclosed locomotive card for recognizing the function icons in Mfx mode.


419,90 EUR*

H305001
Model:
Series 480 S-Bahn Berlin DR 2-parts, motorized, interior lighting, interface 21 MTC (NEM 660) with decoder, light change red / white, Ep. IV, AC-Digital
Prototype:
As a series 480 ordered the Berlin transport services (BVG) from 1986 a series of new S-Bahn multiple units. These traits represented a tremendous technical progress, because in the development in many areas broke new ground. The exterior design also differed greatly from the previous appearance of the Berlin S-Bahn and replaced the aged trainsets of the 475 series. Also new was that at each end of a 2-piece. ¼ train of the new series is a driver's cab, which allows a great flexibility in use can be achieved. The first four prototypes were delivered at the end of 1986 to the BVG as a test in a crystal blue livery. However, this painting did not arrive at the Berliners, so that the second series from 1990 was delivered again in the traditional paint cream / red. The vehicles no. 480.0046 / 546 to 480.059 / 559 went to the Deutsche Reichsbahn (DR) and the following to the Deutsche Bahn AG (BVG) as the new owner of the S-Bahn.
In 1994 it came to the merger of the Federal Railways and the Reichsbahn, and subsequently there was the renaming of all railcars with the new logo of the S -Bahn Berlin GmbH. Hobbytrain develops and produces the S-Bahn models in cooperation with the S-Bahn Berlin. With the ¼-turn (2-piece unit) application already possible, the S-Bahn trains can also be used on smaller systems. By coupling several ¼-trains you can also achieve the prototypical implementation up to the block train.
415,90 EUR*

H305011
Model:
Series 480 S-Bahn Berlin DR 2-parts, non-motorized, interior lighting, interface 21 MTC (NEM 660), red / white, ep. IV.
Prototype:
354,90 EUR*

Roco-69178
Model:
Diesel railcar class 650 "Regio Shuttle" of the Deutsche Bahn AG. Epoch VI. Finely detailed model with interior decoration. Engine with flywheel. Drive on two axes. LED headlight white / red alternating with the direction of travel. AC model with built-in load-controlled digital decoder. Elaborately designed interior.
249,90 EUR*

Piko-57856

119,99 EUR*

Piko-52577
The model of the V 200 GRP in blue of the Deutsche Reichsbahn in ep. III consistently reproduces the characteristic appearance of the V 200 with its fiberglass driver's cabs with multiple split front and side windows. Like the PIKO models of the standard version, the V 200 GFK convinces with a clear, reliable and low-maintenance design. Thanks to the powerful engine with two precisely balanced flywheels and the propeller shaft drives on the four-axle bogies, the model has balanced driving characteristics. On the two internal axes of the bogies sit in diagonal arrangement to each other two wheels with traction tires. In conjunction with the mature drive concept, they ensure high tractive forces. The model of the V 200 GFK has all the usual standards for the PIKO Expert series.
144,99 EUR*
HO & OO gauge
Brawa-41646

Model:
Etched radiator guard (prototypical variant without radiator fins), free-standing handlebars and steps, clear view through the cab, lighting with maintenance-free LED, three-point support, finely detailed suspension, finest imprinting and painting, frame and wheels made of metal, construction made of plastic, coupler pocket according to NEM standard, light change, digital interface: PluX22. Subsequent conversion to the digital version is possible via a 22-pin interface (sound function only). Please note that it is not possible to retrofit the digitally controlled clutch.


209,90 EUR*

Brawa-41648

Model:
Etched radiator guard (prototypical variant without radiator fins), free-standing handlebars and steps, clear view through the cab, lighting with maintenance-free LED, three-point support, finely detailed suspension, finest imprinting and painting, frame and wheels made of metal, construction made of plastic, coupler pocket according to NEM standard, light change, filigree, electrical coupling (exchangeable, thanks to NEM standard mounting) *, incl. Energy storage (buffers sound, engine and light), Extensive lighting functions: Rangierlicht, cab lighting, taillight individually switchable, Optimized lighting control for driving and maneuvering, flicker-free light through stabilized and buffered via a separate capacitor 5V power supply, construction-specific original sound, noise-free 16-bit sound with up to 8 independent channels, thanks to the latest sound technology and excellent sound characteristics, Optimal motor and load control for perfect running characteristics, Can be used in all common digital systems (DCC, Motorola, SX1 and SX2), cab lighting.


419,90 EUR*

Brawa-41642
Model:
Etched radiator protection (prototypical for variant without radiator fins)
Free-standing handlebars and steps
Clear view through the cab
Lighting with maintenance-free LED
Three-point mounting
Finely detailed chassis
Finest printing and painting
Frame and wheels of metal, construction of plastic
Coupling pocket according to NEM standard
Lichtwechsel
Paint: body black / chassis red
Digital interface: PluX22
Subsequent conversion to the digital version is possible via a 22-pin interface (sound function only). Please note that it is not possible to retrofit the digitally controlled clutch.
209,90 EUR*

Brawa-41628
Model:
Etched radiator guard (prototypical variant without radiator fins), free-standing handlebars and steps, clear view through the cab, lighting with maintenance-free LED, three-point support, finely detailed suspension, finest imprinting and painting, frame and wheels made of metal, construction made of plastic, coupler pocket according to NEM standard, light change, digital interface: PluX22, The subsequent conversion to the digital version is possible via a 22-pin interface (sound function only). Please note that it is not possible to retrofit the digitally controlled clutch.
219,90 EUR*

Hornby-R3681

229,99 EUR*

HJ2379
Model:
Steam locomotive series 030 T of the SNCF in epoch III. With 6-pole interface according to NEM 651. Length over buffers: 104mm.
69,90 EUR¹
62,91 EUR*

Roco-73981

Model:
Electric locomotive series 471.5 of the Raaberbahn / Györ-Sopron-Ebenfurti Vasút (GYSEV), epoch VI. Engine with flywheel. Drive on four axles, two traction tires. Four pantographs. NEM 362 Coupler pocket with short coupling kinematics. LED headlight white / red alternating with the direction of travel. Model with digital decoder and digitally switchable sound and light functions as well as buffer capacitor for uninterruptible power supply. Freestanding handlebars, partly made of metal, sound in cooperation with Leosoundlab.

Prototype:
The Hungarian GYSEV / Raaberbahn has ordered 5 locomotives of the Vectron family from Siemens for use in freight transport as well as in IC traffic. In the summer of 2017, the first locomotives were delivered to Hungary. The locomotives are divided into the series 471, where the 471.0 represent the two-stream locomotives with a so-called diesel power module. Three locomotives have multi-system capability and are used as 471.5 in both passenger and international freight transport.

284,90 EUR*

LE15232
 
399,00 EUR*
Roco-76100

2 piece set open goods wagons type El 5100 "Linz" with brakeman's platform of the Austrian Federal Railways. Epoch IV.
Coupler pocket according to NEM 362 standards with close coupling mechanism.

53,90 EUR¹
36,99 EUR*

Roco-76106

2 piece set open goods wagons type "Omm Villach" of the Austrian Federal Railways. Epoch III.
Coupler pocket according to NEM 362 standards with close coupling mechanism.

54,90 EUR¹
36,99 EUR*

Roco-76170

3 piece set self unloading hopper wagons type Fcs of the Deutsche Bahn AG. Epoch V.
The technically and optically redesigned model is equipped with separately applied parts.
Model with coupler pocket according to NEM 362 standards and close coupling mechanism.

94,90 EUR¹
61,99 EUR*

Roco-76195

81,90 EUR¹
49,99 EUR*

Roco-76702
Coad dust container carrier wagon "ERMEWA". Epoch V-VI.
Model with coupler pocket according to NEM 362 standards and close coupling mechanism.
51,90 EUR¹
36,99 EUR*

Roco-76933
Container carrier wagon of the Austrian Federal Railways that carries two containers of the ORF. Epoch VI.
Coupler pocket according to NEM 362 standards and close coupling mechanism.
51,90 EUR¹
48,90 EUR*

Roco-76614

Railway company: Deutsche Bundesbahn
Epoch: III
Gauge: H0
Elect. system: DC
Boxcar of the company "Holzindustrie Hunsrück K.G." that operates for the Deutsche Bundesbahn. Epoch III.
The model features on-printed etched plates.
Model with coupler pocket according to NEM 362 standards and close coupling mechanism.
Specifications:
Coupling   NEM shaft 362 with KK-kinematics
AC Wheel set Article number   40196
Measurements: Length over buffer  139 mm

39,90 EUR*

Roco-76177
Model:
3-piece set with swiveling roof wagon, type Tds, the Slovak State Railway, epoch V-VI. Models with NEM 362 coupler pocket with short coupling kinematics. Revised model with freestanding handlebars.
94,90 EUR*

Roco-76132
Model:
3-piece set with self-unloading wagons, type Falns, the Belgian State Railway, epoch VI. Models with NEM 362 coupler pocket with short coupling kinematics. Freestanding handlebars.
77,90 EUR*

Fleischmann-521610
Model:
Open freight wagon with brakeman's platform, type El-u (Omu), the German Reichsbahn (DR-east), epoch IV. Prototypically labeled and painted. Coupling mount according to NEM 362 with KK kinematics.
26,90 EUR*

Fleischmann-531104
Model:
3-piece set of covered goods wagons, type Gs, NS (Nederlandse Spoorwegen), epoch IV. The set consists of three different painted and labeled Dutch freight wagons. With loading space facility. Prototypically painted and labeled. 2 movable sliding doors each. Coupling pocket according to NEM 362 with short coupling kinematics.
79,90 EUR*

Roco-76837
Model:
Covered freight car with brakeman's platform, type Gmhs / Bremen, the German Reichsbahn. Epoch II. Model with NEM 362 coupler pocket and KK kinematics. Freestanding handlebars.
25,90 EUR*

Roco-76764
Model:
Stake car, type Pdkh 31, the Polish State Railway. Epoch IV. Model with NEM 362 coupler pocket and short coupling kinematics. Loading with 2 Polski Fiat 127, in cooperation with Austrian Car Collection.
45,90 EUR*

Roco-76672
Model:
Covered freight wagon, type Gbs, of the Austrian Federal Railways, epoch IV. Model with NEM 362 coupler pocket and short coupling kinematics.
20,90 EUR*

Roco-76886
Model:
Silo wagon, type Ucs, Swiss Federal Railways, epoch VI. With coupler pocket according to NEM 362 and KK kinematics. SBB cars in use for Holcim.
36,90 EUR*

Roco-76450
Model:
Sliding tarpaulin wagon type Shimms, Ermewa, epoch VI. Model with NEM 362 coupler pocket and KK kinematics. With fine plan replica. For transporting steel coils. With SNCF logistics labeling.
27,40 EUR*

Roco-76448
Model:
Sliding tarpaulin wagon type Shimms "Enercon" set in the Netherlands. Epoch VI. With coupler pocket according to NEM 362 and KK kinematics. Length over buffer 138 mm. For transporting steel coils.
27,40 EUR*

E6541

43,90 EUR¹
39,51 EUR*

Piko-58904
Pressure variant of the tank wagon with bras. in the execution of the Deutsche Reichsbahn in epoch III.
30,99 EUR¹
27,89 EUR*

Piko-58903
Pressure version of the tank wagon with brakeman's cab of the German-American Petroleum Company in the execution of the Deutsche Reichsbahn Gesellschaft in epoch II.
30,99 EUR¹
27,89 EUR*

Brawa-49733

38,50 EUR¹
34,65 EUR*

Bachmann-38-902

42,90 EUR¹
38,61 EUR*

Bachmann-38-901

42,90 EUR¹
38,61 EUR*

Fleischmann-568901
Model:
4-axle compartment car 1./2./3. Class with brakeman's cab, type ABCC, the Prussian K.P.E.V, epoch I. With interior fittings and inserted windows, faithfully painted and inscribed. The car is intended for interior lighting. Coupler pocket according to NEM 362.
46,90 EUR*

Fleischmann-568604
Model:
4-axle compartment car 3rd class with brakeman's cab and lock washers, type CC, the Prussian K.P.E.V., epoch I. With interior fittings and inserted windows, faithfully painted and inscribed. The car is intended for interior lighting. Coupler pocket according to NEM 362.
46,90 EUR*

Fleischmann-568603
Model:
4-axle compartment car 3rd class with brakeman's cab, type CC, the Prussian K.P.E.V., epoch I. With interior fittings and inserted windows, faithfully painted and inscribed. The car is intended for interior lighting. Coupler pocket according to NEM 362.
46,90 EUR*

Trix-T23251
Model:
Trafficable minimum radius 360 mm. With high-entry above the bogies. Standard with built-in LED interior lighting on both levels and current-carrying, separable short couplings. Illuminated longitudinal train destination displays. Interior lighting only works in conjunction with the double-decker control car and can be digitally switched on and off via a decoder in the control car. For this purpose, a defined vehicle sequence is given. Red tail light inserts on the ends of the car at the ends. Prototypical bogies of the type Görlitz, with attached folding steps. Length over buffer 28.6 cm.
Prototype:
IC2 double-decker middle car DBpza 682.2, 2nd class, of Deutsche Bahn AG (DB AG) for long-distance traffic. Light gray long-distance traffic coloring with traffic-red trim, in the current IC design. Train run: IC 2035 from Norddeich to Leizpig Hbf. Wagon ordernumber 3. Operating status 2016.
99,99 EUR¹
89,99 EUR*

Roco-74455
Model:
Reko luggage car of the German Reichsbahn. Epoch IV. Model with interior decoration, prepared for interior lighting. Coupling pocket according to NEM 362 with KK kinematics. 3-axle chassis.
44,90 EUR*

Roco-74451
Model:
Reko seat car of the German Reichsbahn. Epoch IV. Model with interior decoration, prepared for interior lighting. Coupling pocket according to NEM 362 with KK kinematics. Version with two side doors, 3-axle chassis.
44,90 EUR*

Roco-74452
Model:
Reko seat car of the German Reichsbahn. Epoch IV. Model with interior decoration, prepared for interior lighting. Coupling pocket according to NEM 362 with KK kinematics. Version with two side doors, 2-axle chassis.
44,90 EUR*

Hornby-R4815A

42,49 EUR*

Hornby-R4780A

42,49 EUR*

Hornby-R4779A

42,49 EUR*

E5232
Model:
3-axle car transport wagon, loaded with car models, RENFE Transfesa, short coupling kinematics at both ends of the wagon, length over buffers: 305 mm.
60,90 EUR¹
54,81 EUR*

E5231
Model:
3-axle car transport wagon, loaded with car models, RENFE Transfesa, short coupling kinematics at both ends of the wagon, length over buffers: 305 mm.
60,90 EUR¹
54,81 EUR*
Narrow gauge
Busch-12142
Model:
With working headlight. Wheel alignment B. Length: 42 mm.
Prototype:
The model comes from the workshop of the French field railway pioneer Paul Decauville (1846 - 1922), who developed from 1875 own field railway system consisting of rails, lorries and locomotives. Due to its distribution and long running time in different eras, this steam locomotive is universally suitable for many applications such as the forest railway, Ziegeleibahn, tourist train, tram, open pit and Heeresfeldbahn. Today, four of these sturdy locomotives are still in their original condition. One of them can be admired operationally in the Frankfurt field railway museum. The vehicle from the early 20th century has a service weight of 6.5 tons and an output of 20 hp. Typical are the large water boxes, which allow the locomotive a considerable range of action. Many details, such as the design with external frame are perfectly implemented in the model. The filigree rods are even fully movable. New (larger) wagons for a variety of transport purposes complete this development of novelty, the steam locomotive can of course pull all the cars from the Busch Feldbahn range.
125,00 EUR*

Bemo-1266137
Model:
Instead of the factory-sold ABe 4/4 46, we take into account the vehicle with the company number 47 in the new edition of the Berninatriebwagens. Version in the classic livery from the 90s with red engine box, dark brown apron and silver dividing line. Die-cast chassis, five-pole motor, drive and current consumption across all four axes, 6-pin NEM651 plug-in interface, peak signal dependent on direction of travel, brake hoses, heating couplings and handle bars are included in the self-assembly.
309,95 EUR¹
294,45 EUR*

Bemo-1366137
Model:
digital version with sound decoder (MM / DCC / SX)
414,95 EUR¹
394,20 EUR*

Bemo-1288114
Model:
New edition of the RhB Infrastructure locomotive with new operating number and fan cowl / filter adapted to the current state in the side wall or roof pitch. Die-cast chassis, five-pole motor with flywheel, drive and current consumption across all four axes, LED lighting in direction of travel, 3 + 1 white, LED work lights and warning lights for radio control - only digitally switchable, LED cab lighting, etched roof and side wall fan grills, free-standing handle bars made of metal, outside mirrors are included as attachment, can be tracked to H0e (replacement wheelsets optionally available), vehicle weight: 330 gr.
Role model:
The Gmf 287 rail service diesel locomotive manufactured by Schalker Eisenhütte in 2013 stands out visibly from all RhB vehicles since then. The bogie diesel locomotive was procured in four copies and renamed in summer 2015 in Gmf 4/4 234 01-04. For several months, they have been used extensively on the main network and also on the Bernina line for infrastructure deployments. One machine is stationed in the Engadine, while the others in Landquart / Bergün are mostly used for infrastructure trains of the new Albula Tunnel. Most of them, however, are traveling at night.
369,95 EUR¹
351,45 EUR*

Bemo-1388114

489,95 EUR¹
465,45 EUR*

Bemo-2288119
Bündner Güterbahn - Annual Car 2018
A vehicle from the latest 5136-5140 series (without underfloor heating) received advertising slogans in its own right and was dismantled using handwheel actuation of the sliding wall locking system.
69,95 EUR*

Bemo-3246221
Model:
The resulting from the BC4 152 AB 4123 was rewritten in 1972 to B 4231. Model with new bogie type SWS and smoker / non-smoker pictograms. Highly detailed model in plastic construction, brake hoses and handlebars are included in the assembly.
Role model:
In 1914, the Furkabahn purchased from SIG a total of 20 bogie platform cars in several vehicle series as well as other luggage trolleys, two of which were later also converted to passenger cars. Over the years, u.a. the car body is modernized and new SWS bogies installed. In 1959 at the time of the introduction of the new numbering scheme, the AB 4122-4126 and the B 4221-4230 still used as ambulances had open platforms - the eight other vehicles had closed vehicle crossings from 1930 onwards. In the 1960s, many of these cars still had modern bogies of the type SIG and were in operation until about the mid-80s, before either canceled or used components for car transport or panoramic car. Today, only a few parts are available - these are to be rebuilt for use at the Furka mountain route.
87,95 EUR¹
79,15 EUR*

Bemo-3246231
Model:
Six of the 30 four-axle platform cars commissioned in 1914 were rebuilt; they received closed platforms and bellows crossings as well as new SWS type bogies and were classified as A 4061-4062, AB 4161-4162 and B 4261-4262, respectively. New development of four car bodies with matching window inserts, roof, bogie and many attachment parts, such as doors, stairs or interior fittings. Highly detailed model in plastic construction, brake hoses and handlebars are included in the assembly.
87,95 EUR¹
79,15 EUR*

Bemo-3246232
Model:
Six of the 30 four-axle platform cars commissioned in 1914 were rebuilt; they received closed platforms and bellows crossings as well as new SWS type bogies and were classified as A 4061-4062, AB 4161-4162 and B 4261-4262, respectively. New development of four car bodies with matching window inserts, roof, bogie and many attachment parts, such as doors, stairs or interior fittings. Highly detailed model in plastic construction, brake hoses and handlebars are included in the assembly.
87,95 EUR¹
79,15 EUR*

Bemo-3246282
Model:
In 2016, the DFB expanded its fleet with the AB 4462 platform car, which was painted and lettered to match the B 2204, 2206, 2210 and BD 2502 two-axle vehicles. Model with bogie type SWS and modified battery box.
Please note, for technical reasons, the model, like the FO models, has a rounded skirt at the bottom of the side panel. Highly detailed model in plastic construction, brake hoses and handlebars are included in the assembly.
87,95 EUR¹
79,15 EUR*

Bemo-3246233
Model:
Six of the 30 four-axle platform cars commissioned in 1914 were rebuilt; they received closed platforms and bellows crossings as well as new SWS type bogies and were classified as A 4061-4062, AB 4161-4162 and B 4261-4262, respectively. New development of four car bodies with matching window inserts, roof, bogie and many attachment parts, such as doors, stairs or interior fittings. Highly detailed model in plastic construction, brake hoses and handlebars are included in the assembly.
87,95 EUR¹
79,15 EUR*
HO & OO gauge
Faller-191733
Model:
Rendezvous. Fenced recycling yard with three covered parking spaces for vehicles and implements as well as various recyclables containers. This kit contains: 190 items in 12 colors, 1 decoration and 1 construction manual. Dimensions: 201 x 108 x 86 mm, Fence dimensions: 220 x 18 x 1 mm (6 x).
38,99 EUR¹
37,04 EUR*

Noch-66707
Model:
Laser-Cut kit »Grinding Mill«, dimensions grinding mill: 10 x 6 cm, 6 cm high (without water supply).
Role model:
In grinding mills, which were usually operated in the mountains with hydropower, the mountain farmers used to cut their scythes and sickles, with which the mountain meadows were mowed. The construction with mill wheel and inflow are reproduced in detail on the model.
Note: Model article contains: 1,2-Benzisothiazol-3 (2H) -one, mixture of: 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3 :1). Can cause allergic reactions.
39,99 EUR*

Busch-1530
Model:
Kit for a half-timbered building with butcher shop. Real wood framework, incl. Wooden balcony on the back. All parts finished colored. Realistic replica of the sections with plaster structure. With passage e.g. to a backyard (ideal extension: backyard building H0 1531). Intricate replica of the "wrought iron" shield. Rain gutters and downpipes in detail made of plastic. Cut-out sheet with many matching designs. Versatile for a variety of shops, as dairy and e.g. also as a farm direct sale. Prepared for installation of interior lighting.
The assembly of Busch building models is particularly easy thanks to a sturdy, pluggable substructure, which is clad with the finished cut and colored parts. Additionally, only a craft knife and model glue (e.g., Busch 7592 or 7599) or all-purpose glue (e.g., UHU® Kraft) are required. Size: 150 x 80 mm, 100 mm high. Transit: 25 x 30 mm high.
49,99 EUR¹
44,99 EUR*

Busch-1494
Building kit for a compact kiosk in a half-timbered, style constructed building. This attractive model stands out due to the authentic half-timbered reproduction. Also includes an advertising pillar, an advertising sign board and numerous advertisements on a cut-out sheet. Building is also suitable to use as a ticket window at mines, festivals, amusement parks, etc.;
14,99 EUR¹
13,49 EUR*

Busch-5484
Model:
Kit for a flying eagle turning its rounds in a circle. With a bush covering the drive motor. Connection to 14 - 16 V AC, 60 mA. Height: 200 mm.
44,99 EUR¹
40,49 EUR*

Busch-5402
Model:
4 desks with computer workstations (of which 2 monitors lit with white LEDs). Even the detailed replica of the keyboard and mouse on the tables has not been forgotten. Delivery complete with 4 office chairs. Ready for connection for 14-16 V DC or AC voltage.
19,99 EUR¹
17,99 EUR*

Viessmann-1371
Model:
For wall mounting. Maintenance-free thanks to LED lighting.
9,95 EUR*

Brawa-84035
    1 x Lattice-mast Light, Pin-Socket (LED)
    Height 140 mm
    Simple Handling
    Time-consuming cable connections between the lamp and the socket are not necessary
    The lamp can be tilted in the socket up to 10° to compensate for uneven terrain
    Can be separated electrically
    Compatible to each other
    Load-carrying parts made from brass
    Filigree lattice work
    Multi-part lampheads
    Intricately handpainted
13,99 EUR¹
12,59 EUR*

Roco-10797

The Z21® multi LOOP is a reverse loop module that allows comfortable and safe operation of track figures such as reverse loops, track triangles and turntables.

Operating modes: Short-circuit detection - very simple wiring, sensor tracks - short-circuit-free detection, track contacts - detection via switch tracks or reed contacts, mixed operation - double safety.

Compatible with: DCC, MM, RailCom®, analogue mode

RailCom® is a registered trademark of Lenz Elektronik GmbH.

99,90 EUR*

Marklin-66471

109,99 EUR¹
98,99 EUR*

Noch-16753

9,98 EUR¹
6,99 EUR*

Noch-16765

9,99 EUR¹
6,99 EUR*

Noch-16767

9,98 EUR¹
6,99 EUR*

Noch-17520

47,99 EUR¹
24,99 EUR*

Noch-17530

47,99 EUR¹
24,99 EUR*

Noch-17540

20,99 EUR¹
11,99 EUR*

Noch-17550

20,99 EUR¹
11,99 EUR*

Noch-17570

21,99 EUR¹
12,99 EUR*

Noch-17571

21,99 EUR¹
12,99 EUR*

Noch-17572

21,99 EUR¹
12,99 EUR*

Preiser-24767

14,95 EUR*

Preiser-16359
Medieval market 125 unpainted miniature figures, unpainted kit.
Illustration shows design proposal if necessary.
23,99 EUR*

Preiser-10752
Driver for electric cart, suitable for kits Preiser 17120, 17121, 17122 and 17126.
14,95 EUR*

Preiser-10745
Fans with different flags.
14,40 EUR*

Preiser-24763

17,80 EUR*

Preiser-24762

12,90 EUR*

Herpa-308908
Model:
The Liebherr 954 Litronic crawler excavator known by Herpa now appears in the typical Liebherr livery with the new sorting grapple, which was designed to work.
44,95 EUR¹
42,70 EUR*

Herpa-093729
Model:
After the fire truck Herpa now also produces the aerial ladders of the Gelsenkirchen fire department in a one-time edition. A striking feature of the vehicle is the yellow-red warning mark on the basket and at the rear of the vehicle. in a single edition
39,95 EUR¹
37,95 EUR*

Herpa-093941
Model:
The series of neutral fire models known to Herpa is complemented by the brand new Mercedes-Benz Sprinter. The vehicle has the yellow design.
19,95 EUR¹
18,95 EUR*

Herpa-309387
Model:
The Netherlands is home to the trucking company Zandbergen. From the extensive fleet of companies operating since the 1960s, the current MAN TGX XXL appears as a truck transporter for free loading at Herpa. In parallel, Herpa will also offer the new model as a minikit kit with a white cab.
49,95 EUR¹
47,45 EUR*

Herpa-309363
Model:
Talke also uses the current Volvo FH with a flat cab roof. As a Herpa miniature, the new tractor pulls a container chassis, loaded with a 40 ft. Pressure silo container.
39,95 EUR¹
37,95 EUR*

Busch-5635
Ready to use for connection to transformer 14-16 V (AC or DC).
22,49 EUR¹
20,24 EUR*

Herpa-420297
Model:
New type! Shortly after the presentation of the original Herpa presented the new Audi A6 as a sedan. The completely new body and the new rims make the Herpa model in the colors brilliant black and carat-beige metallic a true work of art.
13,95 EUR¹
13,25 EUR*
Busch-43666

16,99 EUR¹
9,99 EUR*

Busch-48102

13,49 EUR¹
6,99 EUR*

Busch-50703

16,99 EUR¹
10,99 EUR*

Herpa-745642
The Military series includes a large amount of high-quality finished military car and aircraft models as printed and blank versions. The technology of the vehicles and airplanes from the time of WWI until today fascinates collectors and diorama builders in equal measure. The series will be expanded continuously with new types and print variants.
27,95 EUR¹
26,55 EUR*

Herpa-746366
The Military series includes a large amount of high-quality finished military car and aircraft models as printed and blank versions. The technology of the vehicles and airplanes from the time of WWI until today fascinates collectors and diorama builders in equal measure. The series will be expanded continuously with new types and print variants.
24,95 EUR¹
23,70 EUR*

Herpa-746335
The Military series includes a large amount of high-quality finished military car and aircraft models as printed and blank versions. The technology of the vehicles and airplanes from the time of WWI until today fascinates collectors and diorama builders in equal measure. The series will be expanded continuously with new types and print variants.
24,95 EUR¹
23,70 EUR*

Herpa-208406

6,50 EUR*

HPR2018

2,50 EUR*

Kibri-99904

4,40 EUR*

Preiser-93059

6,00 EUR*

Busch-5413
Add Christmas spirit to your layout or seasonal display with this working model. Fully assembled evergreen has a dusting snow on its branches and is prewired with seven yellow diodes. Operates on 14 - 16 V AC or DC.
17,99 EUR¹
16,19 EUR*

Noch-25003
Model:
8 cm high, 5 pieces
12,99 EUR*

Noch-25007
Model:
8-14 cm high, 7 pieces
11,99 EUR*

Noch-25006
Model:
15 cm high, 2 pieces
11,99 EUR*

Noch-25005
Model:
13 cm high, 4 pieces
12,99 EUR*

Noch-25004
Model:
8-10 cm high, 5 pieces
12,99 EUR*

Noch-25002
Model:
8 cm high, 5 pieces
12,99 EUR*

Noch-25001
Model:
8 cm high, 5 pieces
12,99 EUR*

Noch-21008
Model:
15, 11, 11,5cm high.
16,99 EUR*

Noch-21007
Model:
13, 15, 11,5cm high.
15,99 EUR*

Noch-21006
Model:
12 cm high, 4 pieces
15,99 EUR*

Noch-21004
Model:
11,5 cm high, 4 pieces
16,99 EUR*

Noch-21003
Model:
8 cm high, 4 pieces
16,99 EUR*

Noch-21001
Model:
7,5 cm high, 4 pieces
16,99 EUR*

Noch-21002
Model:
7,5 cm high, 4 pieces
16,99 EUR*

Noch-26004
Model:
5-9 cm high, 15 pieces
9,99 EUR*

Noch-26003
Model:
5-9 cm high, 15 pieces
9,99 EUR*

Noch-26002
Model:
5-9 cm high, 15 pieces
9,99 EUR*

Noch-26001
Model:
5-9 cm high, 15 pieces
9,99 EUR*
All products in our Onlineshop are immediately available. Please click here to find our full product range. For information on our own production range please visit our Information pages.

If you don't want to receive this email anymore, click here to unsubscribe.